Headache Rack Builder
NOTE: Your real, final headache rack may not appear exactly as shown above. You can request an accurate drawing to be sent to you after ordering. All lightbars ship loose. Pricing may vary based on location and other factors. Custom text light bars are limited to a length of 17 characters.
TERMS & CONDITIONS: We reserve the right to reevaluate pricing prior to order finalization. All pricing is subject to approval by a recognized Iconic MetalGear sales representative. We reserve the right to reject and/or not produce any custom light bar(s) containing content that we deem inappropriate, at our sole discretion. Use of this builder demonstrates that you acknowledge and accept the aforementioned notes and terms. For more information contact us at: 1-877-890-9142 or firstname.lastname@example.org
DISCLAIMER: As stated in the NSC Standard 10: Cargo Securement, Divsion 5 – Front End Structures – Application 23(3) A cab shield (Headache rack) is not and front end structure or part of a cargo securement system. Therefore NO D.O.T. requirements/approvals are applicable.
- Headache racks cannot meet the requirements of CFR 393.114.a. Cargo must be in contact with the front end structure for the CFR 393.114.a to apply.
Iconic MetalGear promotes that all operators be in compliance with all other load securement requirements as stated in 393.100 to 393.142.
“As per the Ministry of Transportations “Commercial Motor Vehicle Operator’s Safety Manual” the following applies:
Within Module 14 – Cargo Securement, it refers to requirements that are adopted from the National Safety Code (NSC) Standard 10, Cargo Securement, as the standard for securing loads in Ontario. Referenced in the subsection “Requirements for Securement Devices” it talks to Front End structures and that the rules concerning this topic are included in NSC Standard 10.
NSC Standard 10: Cargo Securement, Division 5- Front End Structures – Application 23(3) A cab shield (Headache rack) is not a front end structure or part of a cargo securement system.”
Frequently Asked Questions
Can/Do I get a price on the rack I built?
Once you have finished building your rack in the builder, make sure you complete Step 4 with your valid phone number and e-mail address. Your rack will then be sent to our sales team who will put together a price for you that you will receive within 1-2 business days.
How long will it take to get my price?
We strive to get pricing on each rack builder submission within 1 to 2 business days.
However, due to the popularity of the builder it could be up to 5 business days before you receive a response. To get your price faster you can call us at 1-877-890-9142.
I want to order the rack(s) that I've built. How does that work?
Once you submit your rack(s) using the builder above, our sales team will be in touch with pricing as soon as possible. At that time, we will review your order details with you to set up and explain the rest of the ordering process.
How long will it take to get my headache rack(s) after I order?
Due to a number of factors both in and out of our control, we are currently producing flat headache racks and headache rack/hydraulic tank combos in a timeframe of between 1 and 16 weeks, depending on the set-up and current stock levels. Current lead times can be discussed with your sales representative before ordering.
What material and thickness do you guys use to make your headache racks?
We only use high quality, military/marine-grade aluminum on our semi truck products at a minimum thickness of 1/8″ (0.125 inches or ~3mm), and a maximum thickness of 1/2″ (0.5 inches or ~12mm), depending on the component and/or application.
When requested, we can include stainless steel on some of our products as well. Just ask your sales representative when they contact you.
I want something custom that isn't available on the builder. What can I do?
Not a problem!
In most cases we can accommodate custom headache rack requests. Please contact us directly to get that process started.
How do I build a rack, and how does this builder work?
Building Your Rack:
Simply follow the instructions in the builder above to build your headache rack. For each selection you make, the accessory that you select will appear on the rack on the left side of your screen (or above on most mobile devices). When you are done each step, you can navigate to the next step by selecting the orange “NEXT” button.
You can navigate and make changes to your rack at any time prior to submitting by selecting the “Step 1, Step 2, Step 3 and/or Step 4” tabs at the top of the builder.
When you’re happy with the rack you’ve built, just submit the form after completing all of the steps.
Once your ad has been submitted, our sales team will review and will contact you with a price based on your selections.
Errors, Interferences and Incompatible Products
Not all accessories are compatible with other accessories. If you have selected any accessories that interfere with one another or are incompatible with one another, you will see an error noted in red. Once you have revised your selection appropriately, the error message will disappear. Each error message will make clear what each issue is and recommend how to fix it.
Your rack must be free from any errors before we can quote you a price.
Where do you guys ship your products to?
We ship our products across North America, including Canada, Mexico, and the Continental United States (including Alaska).
If you live outside of that area and want to get a hold of our products, please contact us.
How much does it cost to ship to _______________?
We’ll quote you a shipping price when we get in touch with you, before your order is finalized.
Is there any obligation to order after I submit my rack?
Not at all! We encourage you to make and submit as many racks as you want with no obligation to order.
Do you guys do installations?
We do not do installations. However, depending on your location, we may be able to recommend a dealer or installer that can help you out with installation, and even purchasing and ordering. Feel free to ask your sales representative when they contact you.
I'm having issues building my rack, or the builder appears to be broken. What do I do?
If you’re having issues building your headache rack the way that you want it, we encourage you to read through the instructions carefully, including this FAQ section. If you’re still unable to get things the way you want it, please follow the instructions below:
- Visit one of the pages below tha tbest describes your need:
- Select the Orange “Get A Quote” button.
- In the pop-up that appears, complete the form as completely as possible and we’ll be in touch as soon as we can!
If the builder appears to be broken, please contact us.